CTEVT Entrance Exam MCQ Questions with Answers – Practice Set 5

CTEVT Entrance Exam MCQ Questions with Answers – Practice Set 5

10 questions · 15 minute time limit

Read Exam Guide

You can take this quiz as a guest. Log in first if you want it saved to your progress history.

Answer Key & Explanations

  1. In electrical circuits, the unit of electrical resistance is:

    Correct answer: Ohm

    Resistance is measured in Ohms (u03a9), defined by Ohm's Law as voltage divided by current.

  2. Which simple machine is used in a bicycle's gear system to change speed and torque?

    Correct answer: Gear (wheel and axle)

    Gears are a form of the wheel-and-axle mechanism that transmit rotational force and change speed/torque ratios.

  3. In basic carpentry/workshop practice, a 'try square' is primarily used to:

    Correct answer: Check and mark right angles (90u00b0)

    A try square is used to check or mark perpendicular (90u00b0) edges and surfaces in woodworking and metalworking.

  4. Which gas is primarily used in welding (oxy-acetylene welding) along with oxygen?

    Correct answer: Acetylene

    Oxy-acetylene welding uses acetylene gas burned with oxygen to produce a high-temperature flame for welding metals.

  5. In computing, 1 byte is equal to how many bits?

    Correct answer: 8 bits

    A byte is a standard unit of digital information consisting of 8 bits.

  6. Which type of current periodically reverses direction, as supplied by household mains?

    Correct answer: Alternating Current (AC)

    Alternating Current (AC) periodically reverses direction, unlike Direct Current (DC) which flows in one direction.

  7. In civil/construction trade, the ratio 1:2:4 commonly refers to the mix proportion of:

    Correct answer: Cement, sand, and aggregate for concrete

    A 1:2:4 mix ratio typically denotes cement:sand:coarse aggregate used in standard concrete mixing.

  8. Which instrument is used to measure the diameter of small cylindrical objects with high precision in a workshop?

    Correct answer: Vernier caliper

    A vernier caliper allows precise measurement of small dimensions such as diameters, depths, and lengths.

  9. The process of coating iron or steel with zinc to prevent rusting is called:

    Correct answer: Galvanization

    Galvanization involves applying a protective zinc coating to steel or iron to prevent corrosion.

  10. In electronics, a device that allows current to flow in only one direction is called a:

    Correct answer: Diode

    A diode is a semiconductor device that permits current flow primarily in one direction only.